|
Commands can be sent to most hardware objects in the Explorer. To issue commands, right click the hardware object in the Explorer and select the desired command. Here is a list of hardware object types and their available commands.
Object Type
|
Commands
|
Computer
|
No available commands.
|
Controllers
(E400, V1000 or V2000)
|
| • | Refresh Cards Only - Issues a Database Changeover which updates all the cards for the selected controller. |
| • | Refresh Configuration and Reboot - Issues a Database Changeover and resends all controller configuration data. |
| • | Reboot - Sends a reboot command to the controller |
| • | Set Time - Sends the current time to the controller based on the hardware server time and the GMT offset value. |
| • | Query Status - Queries the status of the controller and all attached devices. |
| • | APB Forgive - Resets ALL APB status's for this controller. |
| • | Discover Downstream Devices - Queries the controller for missing or newly added hardware. |
|
Panels
(V100, V200 or V300)
|
| • | Reboot - Sends a reboot command to the controller. |
| • | Query Status - Queries the status of the controller and all attached devices. |
|
Readers
|
| • | Grant Access - Unlocks the door for the defined "Normal Access Time" value. (default is 6 seconds) |
| • | Lock - Locks the door indefinitely. |
| • | Unlock - Unlocks the door indefinitely. |
|
Outputs
|
| • | Activate - Activate the output. |
| • | Deactivate - Deactivate the output. |
|
Inputs
|
No available commands.
|
AHG420 Lockset
|
|
In addition to the object specific commands, every Explorer object has the following commands available.
| • | Cut - This will copy the object to memory (clipboard) and remove it from the Explorer. You can then paste it to another location in the Explorer. |
| • | Copy - This will copy the object to memory (clipboard) and leave it in the Explorer. You can the paste it to another location in the Explorer. |
| • | Paste - This will paste a copied or cut object to a specific location in the Explorer. |
| • | Rename - This will rename the selected object. |
| • | Delete - This will delete the selected object. USE WITH CAUTION |
| • | Properties - Will open the selected objects Properties window. |
|
If a hardware object is deleted by mistake or new hardware was added to a controller, issue a Discover Downstream Devices from the target controller to bring these hardware objects into the Explorer.
|
|