EVENTLOG

# This is the event logger tasks configuration file

# it sets the parameters listed below when the task is created

# A = Event log file name

A /dev/aasram

# B = Event log file size

B 5000

# C = host IP address example:10.7.5.8 (up to 10 space-delimited IPs allowed)

C 10.19.4.130 10.7.3.35

# D = host port example:5000

D 4070

# E = message send delay in seconds

E 2

# F = Encryption flag example:0 = no encyption, 1 = encryption

F 0

# G = download by # of msgs - download size = file size or 0 = turned off

G 1

# H = download time in minutes (whole #) - 0 = turned off

H 0

# J = Date Format 0 = US, 1 = EU

J 0

# K upper alarm level anything above is sent immediately

K 10

# L lower alarm level - anything above is reported

# define lower alarm level for each of 3 communication channels

L 1 10

L 2 10

L 3 10

# M 0-no msgs sent 1-send to ip/port 2-send to syslog 3-send to commtask

M 3

# N message delimiter (1 character)

N ;

# P = download by time of day (hh:mm) up to 4 times a day - 0 = turned off

P 0 0 0 0

# Q = listen port

Q 4050

# R = minutes of inactivity before disconnect (range 5-120, 0=always connected)

R 0

# S = seconds before next connection retry if connect fails (range 15-3600)

S 60