It very important to verify that the network is configured to accept and work with WebBrix.
In summary, verify the following:
| • | TCP port 4050 (from PC to VertX) and port 4070 (from VertX to PC) are available and not being blocked by a firewall or router. |
| • | TCP port 2571 (AHG420 Lockset) is available and not being blocked by a firewall or router. |
| • | Port 80 (for HTTP communication) is available and not being blocked by a firewall or router. |
| • | Ports 23 (for Telnet) and Port 20 & 21 (for FTP) are available and not being blocked by a firewall or router. |
| • | IPMulticasing using port 4555 is allowed on the network and not being blocker by a firewall or router. |
Below is a diagram the visually outlines some of the key network configurations:
