|
The Reader Configuration screen is used to set the properties and behavior of the selected reader (See Figure Reader Configuration).
 Reader Configuration
Here's a description of the reader options:
| • | Status - This is a read-only property and represents the state of the reader. |
| o | Wiegand - Typical for most prox and iclass cards. |
| o | Clock and Data Mode for HID Prox - |
| o | Clock and Data (ABA 128 bits max) - |
| o | Wiegand (ABA Clock and Data format) - |
| • | Normal Access Time - The time in seconds that the strike is activated on a valid card swipe. |
| • | Extended Access Time - The time in seconds that the strike is activated for a valid extended access card swipe. |
| • | Door Held Time - The time in seconds that the door contact needs to be open before the Door Held event is sent. |
| • | Door Contact Line Supervision - Used to supervise the contact against tampering. |
| • | Door Contact Normal Position |
| o | Contact closed when door closed (Recommended) |
| o | Contact open when door closed [or] Nothing wired |
| • | Door Contact Debounce Time - The amount of time (milliseconds) the controller will disregard repetitive door contact events. |
| o | Shunts alarm and unlocks the door (Typical for mag locks) |
| o | Shunts alarm only (Typical for electric strike) |
| • | Rex Shunt/Unlock Time - The time in seconds a REX event will unlock the door. |
| • | Rex Line Supervision - Used to supervise the contact against tampering. |
| • | Rex Contact Normal Position |
| o | Contact closed when REX activated [or] Nothing wired (recommended) |
| o | Contact open when REX activated |
| • | Rex Contact Debounce Time - The amount of time (milliseconds) the controller will disregard repetitive REX events. |
| • | When Saving - Use this section to set defaults for new readers or configure existing readers connected to the controller. |
| • | Recent History - Shows the recent activity for the reader. |
|