The Status screen will list all the hardware objects for the current partition (See Figure Status Screen).
Status Screen
This screen will update or refresh every 5 seconds (default) in order to update the hardware status.
|
To change the refresh rate of the Status Screen, modify the registry value at HKLM\Software\AMT\Settings\HWStatusGridRefreshInterval. |
The text in the Status column indicates the current state of the hardware object. It's worth noting that unlike the rich client, the icons will NOT change to represent the hardware state.
The command columns contain the available commands for the hardware objects.
On larger systems or systems with many hardware objects, use the search box, navigation arrows or rolodex tab to locate specific hardware objects.
To configure the properties of hardware objects, click on the object name. For all practical purposes, the reader object is likely the only object you'll need to configure. See Reader Configuration for more information about how to configure the reader object.